Frames and Fans
Live
Components

Bluetooth 7.0 HDT Boosts Speed to 7.5 Mbps

The Bluetooth SIG has adopted High Data Throughput as an optional feature in Core 7.0, quadrupling the maximum bit rate to 7.5 Mbps to enable lossless audio and faster data transfers from 2027.

The Bluetooth SIG has adopted High Data Throughput as an optional feature in Core 7.0, quadrupling the maximum bit rate...

The Bluetooth Special Interest Group has officially added High Data Throughput as an optional feature of its Core Specification 7.0. This Bluetooth 7.0 speed increase, adopted on November 4, 2026, raises the maximum data rate to 7.5 Mbps, nearly four times the current LE limit.

Speed and throughput gains

HDT fundamentally changes the performance ceiling for Bluetooth Low Energy connections. The leap from a 2 Mbps maximum to 7.5 Mbps enables significantly faster file transfers and data synchronization. A file transfer that takes 16 seconds with classic Bluetooth could be completed in about 4 seconds using the new HDT technology. This raw speed is a prerequisite for more demanding wireless applications.

Technical enhancements

The gains are achieved through a suite of new technical features. HDT introduces a new physical layer alongside higher-order modulation techniques like QPSK and QAM. It incorporates forward error correction across all supported data rates to improve reliability. A completely new packet architecture is.

This new design supports much larger payloads and allows for selective retransmission. Instead of resending an entire packet if an error occurs, HDT packets are divided into blocks with individual checksums. Only the corrupted blocks need to be resent, boosting efficiency. The technology also supports dynamic, per-packet rate adjustment, letting devices switch to slower, more robust modulations when radio conditions are poor.

Key technical improvements include:

FeatureHDT EnhancementPrevious LE Limit
Maximum Bitrate7.5 Mbps2 Mbps
Maximum Packet Payload8,175 bytes251 bytes
MIC Integrity Check64 or 128 bits32 bits
Key RenewalECDH-based during active connectionRequired reconnection

Higher throughput can also improve energy efficiency when measured as energy consumed per bit transferred. An optional link-quality feedback mechanism helps transmitters select the optimal data rate.

First applications and timeline

Premium wireless audio is poised to be the first major beneficiary. Current lossy codecs are insufficient for true lossless audio over Bluetooth. Uncompressed CD-quality audio requires 1,411 kbit/s, while 24-bit/96 kHz high-resolution stereo needs roughly 4.6 Mbit/s. HDT provides the necessary bandwidth. A new High-Resolution/Lossless Codec is under development, with a final standard expected in 2027.

Samsung vice-president Joonsuk Kim stated, "Bluetooth HDT gives developers and product makers a stronger foundation for building more capable products." Beyond audio, the technology is expected to benefit immersive computing, AI-powered devices, industrial solutions, wearables, and smart home products. The first HDT-enabled consumer products are anticipated to arrive in 2027.

Industry readiness

Silicon vendors like Nordic Semiconductor, Qualcomm, and Infineon are preparing new chips. HDT requires new hardware on both ends of a connection and cannot be added via a firmware update. While chips are available, end devices are not expected until at least 2027. No major manufacturer has announced specific Bluetooth 7.0 devices yet.

HDT operates in the 2.4-GHz band and remains backward compatible with older Bluetooth LE devices. However, a device labeled 'Bluetooth 7.0 with HDT' does not guarantee the full 7.5 Mbps speed. The fastest tier, dubbed HDT7.5, requires good wireless conditions and may drop to slower speeds in crowded environments. Widespread adoption across smartphones and wearables is still a few years away. The industry is now building toward a 2027 launch for HDT-enabled lossless audio products.

Related coverage

More from Components